I called HydraStar who is a prominent manufacturer of electric over hydraulic brake actuators and they said the issue that you are having is caused by a compatibility error between the factory integrated brake controller and your electric over hydraulic brake actuator. Therefore, you will need to use an adapter. Please also make sure that you are in the electric over hydraulic mode if that is an option. In order to recommend the correct adapter I will need to know what electric over hydraulic... view full answer...
The Kwikee SuperSlide systems, like part # LC370774, do not have a lift kit available so you would need to build one yourself out of wood in order to clear the 3" lip for your compartment door.
You might be able to use the Height Adjustment Kit for MORryde RV Cargo Sliding Trays # MR34VR, but would most likely need to drill holes into the tray track in order to mount it on the kit since it was intended for use with MORryde trays. view full answer...
If you remove the screen on your vent assembly there should be both a brand and model number listed. If you can provide this then I can give you the correct replacement lid. If not your only other option would be to remove the vent lid you have now and pay attention to the hinge. If it is a continuous hinge like the photo I have attached for you then you can use the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03.
The Replacement Lid for MaxxFan and MaxxFan... view full answer...
You are right that a huge compressor can really be a pain and we have exactly what you need with a portable system, the Bulldog Winch Portable Air Compressor # BDW41003 which only measures about 10-1/2" long x 5-1/2" wide x 7-1/2" tall and weighs under 10 lbs.
This is a 150 psi compressor that has a carrying case to make it simple to transport and has clamps for power from a 12 volt battery like you were wanting.
I have added a link to a video review of this tire inflator for you to... view full answer...
Thank you for the pictures of your setup as based on that we know that the Lippert Manual Landing Gear Set part # LC333966 is a confirmed fit and would work great for a manual setup. Or if you wanted a setup that is powered like what you have now you could use the part # LG-1 which comes with everything new and is exact replacement for what you have now. view full answer...
Most of the available screen door cross bars only expand to 28-5/8", however the Camco # CAM43971 is the only one that will expand to 32 inches. This should be a great solution for you. view full answer...
I called my contact at Lippert and although we do not have an installation video I was able to find the instructions that explain how to install a replacement air spring like part # LC432404.
You would need to do the following per the instructions:
The bag is fastened at the bottom first by inserting the carriage bolt in the key hole shape opening on the lower plate allowing the bolt head to slide in and be pulled forward securing the bag in place. Secure air bag with the air fill fitting... view full answer...
The best match we have for the replacement wheel you are looking for is the Bobcat Trailer Wheel part # LHSO513B which is 16-inch diameter, has the same bolt pattern, and looks like an exact match for style and finish.
Then for a replacement center cap you'd want the part # LHCS109-SI60C. view full answer...
I found a Dexter Nev-R-Lube install/removal guide on Dexter's site and they recommend 145 to 155 ft lbs of torque for the spindle nut of a hub with Nev-R-Lube bearings. view full answer...
For your 2018 Forest River Silverback, the Trailair Flex Air 5th Wheel Pin Box # LC369535 is the correct fit. It will work with the capacity of your trailer as well as will bolt right up to your 1621HD pin box. The only real difference between the 1621 and 1621HD is the HD uses thicker material but has the same dimensions. view full answer...
On most trailers there is not going to be space for two sets of landing gear legs on each side of the trailer so I would have to say no unless a professional fabricator made extensive modifications to the trailer. The issue you described with your hydraulic landing gear set is the reason they are becoming less and less popular. The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC675817 is a far better system in my opinion and you should be able to switch over from... view full answer...
You can install the RV Kitchen Faucet w/ Sprayer # 277-000098 in the orientation you described with the handle on the right side and the sprayer on the left. There's no reason you couldn't do that. As long as the water is connected to the handle and the nozzle correctly it can install in either orientation. view full answer...
There are a couple of support straps at the top step/landing that would likely be in the way and prevent Econo Porch Trailer Step # EHS-103-R from fitting around your existing steps. The height from the ground to the top step is 27-1/2 inches. From the ground to where that strap starts is about 18-1/2 inches. If those support straps weren't there then it would most likely work. view full answer...
Yes! There are a few options and which set fits will depend on the measurements of your existing equalizers. If the eye center to eye center on your equalizers is 5-1/4 to 6-1/4 inches with a height from the top center hole to the eye center holes of around 2 inches then you can use # K71-652-00.
If your equalizer length measurement is 7-1/4 to 8-1/4 inches then you can use # K71-653-00.
If your equalizers are 7-1/2 inches long with a height of around 5 inches you can use # LC279688.
Another... view full answer...
There is a possibility that going over a bump could then cause the Curt Adjustable Trailer Hitch Receiver part # C13701 to drag the pavement. In order to prevent damage to the trailer hitch I recommend installing skid wheels like part # UF48-979014. I have attached a photo of these skid wheel installed to give you a better idea of how they will work. You would not experience any damage to the trailer's frame and trailer hitch once the wheels are installed. Unfortunately, this is the only... view full answer...
The Curt Tri-Ball Trailer Coupler Lock part # C48CR does not come with a keyed alike option so you'd only be able to receive multiple with the same key by chance. That said, we have plenty of other multi fit trailer coupler locks with keyed alike options such as the Fastway Universal Trailer Coupler Lock part # FA86-0015-316 which is what I recommend. It can be ordered keyed alike. view full answer...
Yes to both. In order to switch out the manual adjust braking assemblies for the self-adjust braking assemblies on your Lippert 6,000 lb axle you will need the Electric Trailer Brake Kit part # AKEBRK-7-SA. In order to replace the brake shoes on your existing brakes you will need to use the Replacement Shoe and Lining Kit for 12" Manual-Adjust Brake Assembly part # AKBRKR-S-12.
I have attached review videos for you as well. view full answer...
I tried looking up the Optronics Model 291 but couldn't locate anything. The G4/JC10 LED Light Bulb (cool white) # DI33VR and the G4/JC10 LED Light Bulb (warm white) # DI93VR are the LED equivalent to 20 watts, 12v and has the 2 pin design. I didn't find anything else with those specifications. If you can send in the picture of your current light bulb I can try and track down the replacement for the bulb you have for you. view full answer...
When you plug in the Lippert Replacement Control Panel # LC421484 it will immediately recognize the connected controller board. This part does not need to be programmed; it is plug-and-play, which was confirmed by Lippert.
In a separate link I have sent the complete documentation for Lippert Replacement Control Panel # LC421484. view full answer...
Go To Results